
Tornado ACS 28 (USA/CA) for USA and Canada
The special cleaning equipment Tornado ACS 28 is based on a world wide patented vacuum blasting system, that is a ridable cleaning machine, not bigger can a conventional vacuum cleaner.
The special cleaning equipment contains a low pressure generator with appropriate filtre cartridges, dust deposition and as well belonging containers of blasting material. Further accesoiries of the special cleaning equipment Tornado ACS are the jet cap and the jet lance.
Face capacity:
The face capacity of the special cleaning equipment highly depend on the material and consistance of the to-be-cleaned surface. Because of that you could approx. say that the face capacity is about 1,5 - 5,0 qm/h. With easier application areas the capacity can lie higher as well.
Face capacity of special cleaning equipment Tornado ACS 28
The face capacity of special cleaning equipment Tornado ACS 28 is strongly dependant on the material to be removed and the hardness of the base coat. Therefore the face capacity amounts to 1,5 – 5,0 qm/h depending on the application. On very light applications, the face capacity is even above.
Functioning of special cleaning equipment Tornado ACS 28
The special cleaning equipment Tornado ACS 28 is easy to set up. All components are simply plugged together. After turning on the vacuum generator the abrasive is sucked from the container into the cleaning device. Subsequently the middle flap must be opened and closed again, to allow the special cleaning equipment Tornado ACS 28 to be ready for use.
The jet cap is places on the work surface and adheres to it by the vacuum. In the jet cap a vacuum of about 150 mbar is generated. With the introductionof the jet lance into the jet cap the cycle is closed. The blasting material is sucked through the jet lance and is accelerated to about 400 km/h. With this speed the blasting media impinges on the surface to be worked on, which will be according to the needs cleaned, stripped or roughened.
This process can be optimally controlled by the user via three vision panels. After impinging, the granules and the removed debris are sucked in immediately. Inside the special cleaning equipment a fine dust filter is seperating the debris from the granules. The blasting media then gets back to the storage container for further processing. Due to the closed cycle, the cleaning device has a minimum granule consumption.
The special cleaning equipment Tornado ACS 28 works with a low noise level (75 db) not louder than a common industrial vacuum cleaner. The unique minimally abrasive vacuum blast method is protected by patent.
Applications of special cleaning equipment Tornado ACS 28
The Tornado ACS 28 cleaning technology is primarily used for the following applications:
- graffiti removal
- facade cleaning
- floor cleaning
- tile and grout cleaning
- tile cleaning
- saltpetre removal
- limestone removal
- lacquer removal from a boat
- fire damage restoration
- layer and lacquer removal
- listed surface cleaning
- special cleaning
- photo engraving on granite
Advantages of special cleaning equipment Tornado ACS 28
The cleaning machine Tornado ACS 28 has many advantages compared to the conventional sandblasting or a high pressure cleaner. The most important
are:
- simple handling (no specialized staff necessary)
- fast setup and dismounting (max. 5 minutes)
- transport possible in any vehicle
- only 120V~/20 A power connection necessary
- low noise level, da it works without compressor
- protective clothing is not necessary
- no use of water and chemicals (very ecofriendly)
- environmentally friendly due to the closed cycle
- working in public business (barriers not necessary)
- blasting media can be reused up to 80 times (low cost for consumables)
- no hazardous waste in the disposal
- in winter with frost useable
Contact Tornado ACS today
Contact us today to learn more about our perfect eco friendly cleaning equipment.
Tel.: +49 30 32 70 11 84
info@sys-teco.com
contact form
Cleaning machine Tornado
Advantages
- without high-pressure
- without water
- without chemicals
- no protective clothing
- working in public business
- normal power connection
- simple handling
- light and compact
- low noise level
- no hazardous waste
- useable in winter
Fields of application
- graffiti removal
- facade cleaning
- efflorescence removal
- floor cleaning
- tile and grout cleaning
- natural stone cleaning
- ivy removal
- lime removal
- stair restoration
- removal of floor markings
- rust removal
- slip resistance
- grout cleaning
- lacquer removal on boats
- antifouling removal
- fire damage restoration
- special cleaning
- photo engraving
- qr code on granite
Your partner for eco-friendly and innovative cleaning
Production:
systeco GmbH
Gewerbepark 26
03222 Lübbenau
service@sys-teco.de
Sales:
systeco Vertriebs GmbH
Herbartstrasse 28
14057 Berlin
Tel.: +49 30 32 70 11 84
Fax: +49 30 32 70 21 34
info@sys-teco.com
Innovative cleaning technology
eco-friendly cleaning
Cleaning machines
Vacuum blast machine
Mobile blast unit
Surface cleaning
cleaning systems
Graffiti removal
Removing graffiti
Facade cleaning
Efflorescence removal
sandstone cleaning
granite cleaning
ivy removal
Brick cleaning
Travertine cleaning
Tile floor cleaning
Tile and grout cleaning
Cleaning tile grout
Stair restoration
Slip resistance
Varnish removal boats
boat cleaning
Fire damage restoration
special cleaning
Removal of floor markings
Photo engravings
engraving on granite
Granite engraving
Stone engravings
QR codes cemetery