Eco friendly fire damage restoration

After a fire, the indoor walls must be cleaned completely. With conventional methods, such as high-pressure cleaning or dry ice blasting without a closed circuit, is hardly possible. With the cleaning equipment Tornado ACS the surfaces can be cleaned without polluting the environment. Due to the closed circuit the removed soot remains in the cleaning machine.

There is a HEPA filter especially for fire damage restoration, which we have offered as an option since 2018. 

Eco-friendly fire damage restoration in Riga

The flat was badly damaged by the fire. The soot was everywhere. Without stirring up any more dirt, the soot was easily removed with vacuum blasting from systeco cleaning technology

With the cleaning machine Tornado ACS you can reach an area coverage of about 2 - 5 m2 / h. For eco friendly fire damage restoration you mainly work with fine granules (jet glass SG 150 or asilit AS 180).

Fire damage restoration in Bremen

Eco friendly fire damage restoration can be done with cleaning equipment Tornado ACS uncomplicated and clean. In contrast to a pressure washer or sand blasting, you can work without protective clothing. The cleaning machine Tornado ACS is the alternative for eco friendly fire damage restoration.

In the first experiment, the latex wall was washed, which did not lead to the desired result.

In the bathroom and kitchen tile and grouts can also be cleaned quickly after  fire damage.

Fire damage restoration in a basement in Bielefeld

In a basement in Bielefeld fire damage must be eliminated. Walls, ceiling and floor are covered with soot. Before painting the soot must be removed completely. How can you do that without high pressure, water and chemicals?

In that case only the vacuum blast method of systeco can help. With the cleaning machine Tornado ACS surfaces can be cleaned without polluting the environment. Due to the closed cycle neither granulate or soot can enter the outside.

Dealing with the cleaning machine is learned in a few minutes. An employee of the company Kurz Um-Meisterbetriebe e.V.  can immediately start with the soot removal after a short introduction. Moreover, the operation is very easy and special protective clothing is not required.

The Tornado ACS is the ideal alternative to a pressure washer or dry ice blasting. That way eco friendly work in- and outside is possible.

In the following Video you can see clearly, how fast soot can be removed with cleaning machine Tornado ACS.

You can work on walls, ceilings or floors with the cleaning equipment. Through various adapters corners, pipes and pillars can be worked on.

Fire damage restoration in a bakery

After a fire in a large bakery in Austria the ceiling of the production hall had to be cleaned during operation. This challenge only cleaning machine Tornado ACS with its unbeatable vacuum blast method met the requirements.

During cleaning two machines were used, which were each on a manlift. Throughout the fire damage restoration, production had not to be interrupted.

The vacuum blast technology of systec is applicable in many areas and not only suitable for fire damage restoration.

From graffiti removal to photo engraving there are dozen of different application possibilities.
Have a look on our website. You will discover many interesting possibilities for the use of the Tornado ACS.