Fire damage restoration at running operation

After the fire was extinguished, the further processing by competent personnel is imperative. Released pollutants from burned surfaces, have to be removed and cleaned professionally in accordance with legal provisions.

Very often, you are faced with the question of how one can perform the fire damage restoration, without interrupting the running operation. The costs of stopping the production are usually extremely high. In this case, it would be good to have a cleaning machine that meets these requirements.

Fire damage restoration with vacuum blast method

Systeco's innovative cleaning technology works based on the vacuum blast method, which is to the contrary of a
pressure washer or sandblaster, it's absolutely eco-friendly. With the cleaning machine Tornado ACS fire damages
are completely removed from interior walls and facades. Even tile grouts in bath and kitchen are totally clean again
in the fire damage restoration with the vacuum blast method. The operation is simple, and the cleaning operation
can be carried out without great force.

The Tornado ACS cleaning technology can be used both for internal and external cleaning process. The possible area performance is about 3 to 5 square meters per hour.

Fire damage restoration without burdening the environment

In the fire damage restoration with cleaning machine Tornado ACS all removed fire residues remain in the closed cycle. These are disposed of only after the end of the operation. Special health and safety measured or protective clothes are not required.

With cleaning equipment Tornado ACS not only effective fire damage restoration can be conducted, but also algae, moss, rust, efflorescence and graffiti can be removed completely from facades, walls and house walls.

Have a look at our website, to find out all application possibilities of cleaning technology Tornado ACS.