Boat bottom paint removal

Boats must be cleaned regularly in the underwater area and stripped before a new coat. The conventional methods are grinding and sandblasting. Both methods are very stressful, time consuming and cause a lot of dirt. In addition, various protective measures must be observed in sandblasting.

Boat bottom paint removal with vacuum blasting
without high pressure, without water and chemicals

The patented Tornado ACS cleaning machine works according to a unique future oriented vacuum blast method with special granules. The minimally abrasive technology allows an eco friendly cleaning, stripping and decoating of surfaces. With the vacuum blast method it is cleaned in a permanent cycle. The granules can be reused again (up to 100 times).

The cleaning equipment is easy to use and applicable for everyone. Thus, the cleaning machine Tornado ACS is the ideal alternative to grinding, sand blasting machines and dry ice blasting.

With the cleaning machine Tornado ACS boat bottom paint removal is easily done on a trailer and without polluting the environment. The surfaces to be stripped to the hull, can be fixed well. To mask the remaining areas is not necessary.

The alternative to the high pressure cleaner

The Tornado ACS is a worthwhile investment for any boat club and every marina.  Especially for small clubs, this cleaning technology suits perfectly. Due to the closed cycle of this vacuum blasting method, all paint and dirt residues and granules remain inside of the system. Since neither high pressure, water nor chemicals are used, protective clothing and barriers are not necessary during the boat cleaning.

In addition, the cleaning machine is often used in graffiti removal, facade cleaning, fire damage restoration and saltpetre and lime removal.

Systeco stands for effective and eco friendly cleaning methods. With our patented vacuum blasting method we have developed future oriented cleaning machines. The company guarantees the quality of its solid long-lasting products. On our website you can get comprehensive information about the systeco cleaning technology and the many possibilities of the Tornado ACS cleaning machine.

Boat varnish removal with Tornado ACS

Boat varnish removal, but you´re not sure of what is the best way to do that? Then have a look at the cleaning equipment of systeco. With cleaning technology Tornado ACS, boat varnish removal is very easy without straining yourself.

Boat varnish removal without corrosives and grinders, with the Tornado ACS it is much simpler!

The ecofriendly cleaning equipment Tornado ACS works compared to grinders and sandblasters, in a closed cycle, which while boat varnish is removed, doesn´t allow residues entering the environment.

You simply have to put only the jet cap of the cleaner on the boat surface and move the jet lance smoothly and evenly over the surface.

Through vision panels you can see then how the varnish is released from the surface by blasting material (granules) from the surface and is sucked in by the suction tube of the machine: 

The waste disposal takes place after the cleaning process. The cleaning machines of systeco are light and can be used anywhere. There are simple to handle and have a low noise level. Safety measures like filter mask, protective clothes or protective glasses are not required removing varnish from a boat. Try it yourself; with the cleaning technology Tornado ACS boat varnish removal is easy done. Just get in touch with one of our German or International trading partners.

This small video shows impressively how quickly and environmentally friendly the paint of the boat hull is removed. See for yourself.

With the cleaning equipment Tornado ACS a boat can be worked on a trailer, without polluting and stressing the environment.

The ares to be stripped to the hull can be fixed well. Especially for small clubs, this green cleaning technology suits perfectly. Due to the closed cycle all paint residues and granules remain inside of the cleaning machine.